| Active Components 1 |
 |
 |
|
All these sensors, detectors and magnetic contacts can be connected to an ePowerSwitch 4XM / 8XM or an Argomon RMS and used to trigger number of programmable emergency actions like sending Emails, Syslog informations, SNMP Traps and switching ON or OFF electrical devices. |
|
|
|
|
Temperature Sensor
T SENSOR
|
| Advantages |
| For xBus of 4XM / 8XM and Argomon RMS |
| No external power supply needed |
| No sensor recalibration needed |
| 1.80 m xBus cable included |
| -25 to +100 °C, Accuracy : +/- 2°C |
|
|
Temperature and Humidity Sensor
TRH SENSOR
|
| Advantages |
| For xBus of 4XM / 8XM and Argomon RMS |
| No external power supply needed |
| No sensor recalibration needed |
| 1.80 m xBus cable included |
| -40 to +100 °C, Accuracy : +/- 2°C |
| 0 to 100 %RH, Accuracy : +/- 3%RH |
|
|
Smoke Detector
SMOKE DET W (white)
SMOKE DET D (brazil)
|
| Advantages |
| For I/O Port of 4XM / 8XM and Argomon RMS |
| Simple 2-wire connection |
| Battery operated |
| Flat case and attractive design |
| Colour : polar white or dark brazil |
|
|
Magnetic Contact
MAGNETIC CON
|
| Advantages |
| For I/O Port of 4XM / 8XM and Argomon RMS |
| Simple 2-wire connection |
| Contact closed when magnet and reed switch are together |
|
|
I/O Extension module for ePowerSwitch 8XM
IO EXT MOD
|
| Advantages |
| For an easy connection of active components to an ePowerSwitch 8XM |
| Tool-free snap-in connection using the clamp connector |
| Easy connection to the I/O Port of the ePowerSwitch 8XM using the provided cable |
|
|
|
|
